Ottochento
◆ Product
100%
| Coverage | 320–400 SF per 1 gallon |
|---|---|
| Sheen range | Satin – Semi-Gloss |
| Color Variant | NCS |
| Suitable for | |
| Composition & base | Water-based dispersion of acrylic resins combined with selected metallic and mineral pigments. |
| Surface prep | level-5 |
| Application | Apply over a properly prepared, smooth substrate primed with a suitable Oikos acrylic primer (e.g., Crilux or Neofix) and a tinted base coat (Supercolor by Oikos) in a shade lighter than the finish color. Apply Ottocento in thin, irregular passes using a stainless-steel trowel, working the product across the surface; while still wet, pass over it again with a clean trowel to blend and create the signature two-tone velvet effect. Decorative variations (e.g., Imperiale, Damasco effects) can be achieved with a sponge or dabbing tool. For a fully washable, protected surface, a transparent protective topcoat can be applied once cured. |
| Care & maintenance | Once cured (and topcoated with a protective varnish if full washability is required), the surface can be cleaned with a soft, damp cloth and mild, non-abrasive detergent. Avoid abrasive sponges, solvents, or aggressive cleaning agents, which can damage the metallic finish. Minor scuffs can typically be refreshed by re-passing a trowel with a small amount of matching product. |
Coverage varies by material and is quoted differently by each manufacturer — some by weight per SF, some by volume per SF. On the site all of them are normalized to a single readable form (SF per 1 gallon / 1 quart) so materials can be compared directly.
